Bag Filters
Sabo Industrial offers standard bag filters for use in a bag filter housing as well as our specially designed bag filters.
Our 157, 247 and 347 series bags have been designed specifically to meet the requirements of open head discharge filtering. This exceptional design eliminates leakage and allows for a secure fit to the adapter head.
All of our bag filters are glazed to minimize fiber migration and are provided with a galvanized steel snap ring along with handles for ease of replacement. The thread used by Sabo is silicone free.
The raw material purchased to manufacture our bag filters is certified to contain no animal derived components and are in compliance with European Directive ED2002/72 and United States FDA title 21CR177.1520 and that all chemical components are on the positive list of the above regulations.
Standard Bag Filters Polypropylene
Item Number:
Micron Rating:
CFM @ .5” DP:
Weight/OSY:
Thickness:
PO-1
PO-5
PO-10
PO-25
PO-50
PO-100
PO-200
PO-250
1
5
10
25
50
100
200
250
20-50
40-80
60-120
110-180
160-280
200-350
350-550
350-550
14.0-16.0
9.5-10.5
9.5-10.5
9.5-10.5
9.5-10.5
9.5-10.5
11.013.0
11.013.0
0.085 - 0.105”
0.065 - 0.085”
0.075 - 0.095”
0.075 - 0.095”
0.085 - 0.105”
0.085 - 0.115”
0.135 - 0.165”
0.135 - 0.165”
Sabo Specialty Bags Polypropylene
Item Number:
Micron Rating:
CFM @ .5” DP:
Weight/OSY:
Thickness:
157RCRS50
247RCRS50
307RCRS50
307RCRS100
50
50
50
100
160-280
160-280
160-280
200-350
9.5-10.5
9.5-10.5
9.5-10.5
9.5-10.5
0.085 - 0.105”
0.085 - 0.105”
0.085 - 0.105”
0.085 - 0.115”
All bag filters available in polyester upon request. Minimum order requirement applies.
247 & 307 Series Bag Filters
Each of our treatment units has a bag filter tank. The bag filter tank is utilized to separate the sludge that is produced from the treatment process and the treated water. The sludge is collected in the bag filter for disposal and the treated water is transferred to a tank for water reuse (if applicable) or legally discharged.
Our 247 & 307 series bag filters have been designed specifically to meet the requirements of open head discharge filtering. This exceptional design eliminates leakage and allows for a secure fit to the adapter head. This provides for a good reliable means of filtration.
Our bags are manufactured of 10oz. virgin polypropylene and are glazed on one side to act as a means of lubricating the inside of the bag to prevent the floc from sticking to the bag. This process provides the option of emptying the sludge and reusing the bag. This offers a considerable cost savings.
In addition to making the bag filters that are used with our equipment, we have also expanded to include bag filters that are used inside of a bag filter vessel. Standard sizes are available.
All of our bag filters have a galvanized snap ring and handles for easy removal. Various sizes and micron ratings are available.
